The watch camera has a hidden camera, which can take pictures and record videos.
computer
Manual, data cable
Related content Illegal climbing taken from experience
When the storage space of the camera is insufficient, it will automatically save the current image file and shut down after the green and red lights flash for about 3 seconds. If you want to continue using the camera, backup the required image file on the computer and delete the old file in the memory to free up enough storage space. When the camera battery is insufficient, it will automatically save the current image file and shut down after the green and red lights alternately flash for about 3 seconds. If you want to continue using the camera, please charge it and use it.
When the camera stops responding due to accidental improper operation or other special reasons, press the Confirm button and the power button at the same time, release the power button to turn off the power, and restart the power before use. Can not turn on: battery is there electricity, please charge; Press the Confirm button and the Power button at the same time, release the power button to turn off the power and restart the power. No recording or recording: indicates whether the disk space is full. Do not connect to the computer: Please make sure that your operating system, drivers, USB port, cable is normal.
Waterproof Settings: The hole cover on the microphone must be replaced with a sealed cover. Take care to tighten each cover.
Tip: 1) When the camera is taken after the waterproof function is set, the sound cannot be recorded because the microphone hole is sealed. 2) When recording and recording normally, the cover on the microphone position can be replaced with a hole cover, so that the sound can enter the microphone. However, remember that it is not waterproof at this time, so it cannot be exposed to wet environments such as rain. 3) When replacing the cover, the cover replaced from the microphone position can be placed on the cover storage position to avoid loss.