How to change the opener
Tools/Materials
Wire, diagonal pliers, vise, wire tape, working gloves, opener
Methods/Steps
1
Rotate the old T8 lamp to remove the starter from the lamp holder, then rotate the activator and never put it back on.
2
Remove fluorescent lamp top cover, expose. That is, the wires connected at both ends are cut off and connected together.
3
Cut off both ends of the wire and use diagonal pliers to remove the wire coating at the end of the wire, exposing 1-2 cm of metal wire.
4
The exposed metal wire, with a vise to wrap it tightly together, two lines to wrap it together.
5
Wrap the exposed metal wire with insulated wire tape, reinstall the top cover, and the activator does not need to be installed back into the LED T8 light.