query

1335Currently online
199Today's Reading
26Share Today
Multilingual display

【 Instruction 】 BaoKP-PK45W type electric heating water bottle

2018-04-17 12:48:10

Bao KP-PK45W type electric water bottle use process description.

Tools/Materials

Bao KP-PK45W type electric heating water bottle.

Methods/Steps
1

Product introduction: Name of each part 1 air pressure plate; 2 Upper cover switch plate; 3 Control panel; 4 Water outlet; 5 water meter; 6 Base; 7 Lift a handle; 8 Power socket; 9 Inner liner seal gasket; 10 inner liner cover; 11 Power Cables.

2

Replacement of consumables: the inner liner cover gasket, the inner sand rubber gasket of the upper cover group, the exhaust seat and the body of the upper cover group are all consumables, which will have the problem of long service life due to different water quality and use method. If there is aging, dirt and serious damage, please contact the service station for replacement. (This part of the cost is handled by consumers at their own expense) Any shaped product that comes into contact with heat and steam in the hot water bottle will be damaged with the use of time. If a similar situation occurs, please contact the service station as soon as possible to repair and replace new parts. (This part of the cost is handled by consumers at their own expense)

3

When using for the first time, boil the water once and then pour it away. The first use of the new product will have a slight plastic taste, after 2-3 days of use, the taste will fade, please feel safe to use.

4

Water supply line: When the water level of the water level window is lower than the water supply line or near the water supply line, water needs to be added immediately at this time to avoid empty burning phenomenon, causing danger.

5

When there is no water in the inner tank: when the water level of the inner tank is lower than the water line or there is no water at all, the machine will automatically jump to the heat preservation state (30W power) when it senses empty burning. At this time, please add water as soon as possible and re-boil to avoid excessive heat preservation time or other dangers or damage to the machine.

6

Add water: Open the top cover switch plate open the top cover and fill the water bottle and other containers. Do not add more water than the full water line, so that hot water will not overflow when boiling, causing danger. When heating, if the water volume is lower than the water line, it is easy to damage the inner tank and the heater. Close the top cover. If the top cover is not closed, it will continue to boil, causing hot water to overflow, causing danger. Make sure to press down the top cover until you click.

7

Water: Press the air pressure plate down to provide water. Press the operation panel "electric water supply" to provide water. "Clink cup water supply" behind the water outlet, touch the edge of the cup, you can feed water.

8

Supplementary water supply: open the cover, try to avoid the steam hole, so as not to burn. Water under the water line for a long time to keep warm, may cause failure or affect the water, should be avoided. In the heat preservation state, the temperature sensor will automatically heat up when the feed water is replenished. When the heating light is on, it starts heating, and automatically switches to the heat preservation state after boiling. After boiling, do not open the top cover to avoid steam burns.

9

In the heat preservation state, it will automatically reheat and boil due to changes in room temperature, reducing the water temperature, and it is not a fault phenomenon. When the heating light is on, it starts heating, and automatically switches to the heat preservation state after boiling.

Recommendation